Site Information

 Loading... Please wait...

Meyer MINA Loudspeaker


Other Details

North America & Europe
Limited warranty
Sales Questions?:

Pre-owned MINA loudspeakers in very good shape with few minor cosmetic scratches. Properly maintained and cared for all units are in good working order. For inquiries contact

Meyer Sound’s MINA, is best defined as a ultracompact loudspeaker with astonishing power; MINA’s Exceptional fidelity and transient response offers intelligibility and high impact in installed and touring applications alike, delivering wide and even coverage, with pristine sound..Delivering the same signature MILO sound characterized by extended high-frequency response and an even wider 100- degree horizontal coverage, MINA was conceived for small footprint, high-power curvilinear arrays. Configurations of eight or more cabinets can comfortably cover up to 130 feet (40 m) and are an excellent compact solution for applications not requiring the power of larger systems comprised of M’elodies and MICAs. A myriad of MINA array configurations are possible to suit each venue’s needs, with additional cabinets and adjustable splay angles able to contour the system’s high-frequency vertical coverage and low-frequency directivity. Entire MINA systems can be designed with Meyer Sound’s MAPP Online Pro®, effectively anticipating coverage needs.

MINA includes two 6.5-inch cone drivers and one 3-inch compression driver mounted on an acoustical manifold coupled to a low-distortion, 100-degree horizontal, constant directivity horn. The close proximity of the cone drivers to each other, as well as to the high frequency horn, allows them to operate in parallel over their full frequency range to deliver the greatest acoustic output. The optimal driver placement extends MINA’s remarkably consistent 100- degree horizontal polar pattern below 500 Hz. The acoustical manifold, based on Meyer Sound’s patented REM™ ribbon emulation technology, radiates driver output with very low distortion and a focused, well-behaved, narrow dispersion, minimizing destructive high-frequency interactions between cabinets.



  • Very small footprint and narrow width ideal for small venues or fill applications
  • Exceptional fidelity and transient response for intelligibility and high impact
  • Extremely high power-to-size ratio
  • Flexible mounting options
  • Wide and even horizontal coverage pattern
  • Seamless integration with M’elodie and MICA



Operating Frequency Range:


70 Hz - 18 kHz

Frequency Response:


70 Hz - 17.5 kHz (+/- 4dB)

Phase Response:


1 kHz - 18 kHz (+/- 30 degree)

Maximum Peak SPL:


128 dB

Dynamic Range:


> 110 dB







Varies, depending on array length and configuration




760 Hz


Low/Low-Mid Frequency:


Two 6.5" cone drivers with neodymium magnets

Nominal impedance: 4 Ω

Voice coil size: 1.5"

Power handling capability: 600 W (AES); 900 W peak

High Frequency:


3" compression driver
Nominal impedance: 8 Ω
Voice coil size: 3"
Diaphragm size: 3"
Exit size: 1.2"




Differential, electronically balanced

Max. Common Mode Rejection:


+/- 5V DC



Female XLR input with male XLR loop output

Input Impedance:


10k Ohms differential between pins 2 and 3



Pin 1: Chassis/earth through 220 kO, 1000 pF, 15 V

clamp network to provide virtual ground lift at audio frequencies
Pin 2: Signal (+)
Pin 3: Signal (-)

DC Blocking:


Differential DC Blocking up to the maximum common mode voltage.



> 50 dB, typically 80 dB (50 Hz - 500 Hz)

RF Filter:


Common Mode: 425 kHz
Differential Mode: 142 kHz

TIM Filter:


Integral to signal processing (<80 kHz)

Nominal Input Sensitivity:


0 dB V (1 V rms, 1.4 V pk) continuous is typically the onset of limiting for noise and music.

Input Level:


Audio source must be capable of producing +20 dBV (10 V rms, 14 V pk) into 600 Ohm

in order to produce maximum peak SPL over the operating bandwidth of the loudspeaker


Amplifier Type:


Three-channel Class D Amplifier

Output Power:


975 W (three channels; 2 x 375 W, 1 x 225 W)

Total Output:


1950 W peak



< .02%

Load Capacity:


4 Ohm low and mid; 8 Ohm high channel



Convection Cooled


AC Connector:


PowerCon with looping output

Voltage Selection:


Automatic, continuous from 90 - 265 V AC

Safety Agency Related Voltage:


95 V AC – 125 V AC, 208 V AC - 235 V AC, 50/60 Hz

Turn On/Off Points:


90 V AC turn-on, no turn-off
Internal fuse-protection above 265 V AC




Idle Current:


0.256 A rms (115 V AC); 0.249 A rms (230 V AC); 0.284 A rms (100 V AC)

Max. Long Term Cont (>10 sec):


1.26 A rms (115 V AC); 0.66 A rms (230 V AC); 1.50 A rms (100 V AC)

Burst Current (<1 sec):


3.24 A rms (115 V AC), 1.74 A rms (230 V AC), 4.02 A rms (100 V AC)

Ultimate Short Term Peak:


10.4 A peak (115 V AC), 5.2 A peak (230 V AC), 11.1 A peak (100 V AC)

Inrush Current:


16.8 A peak (115 V AC), 20.0 A peak (230 V AC), 15.0 A peak (100 V AC)




Equipped with two-conductor twisted-pair network, reporting all

operating parameters of amplifiers to system operator’s host computer.




20.27” w x 8.38” h x 15.32” d with rigging pins (515 mm x 213 mm x 389 mm)



41.2 lbs (18.69 kg)



Premium Birch Plywood



Black textured

Protective Grill:


Powder-coated hex stamped steel with black mesh

Quick Fly Rigging:



Rigging and Accessories:


MG-MINA : Fly Grid
MTF-MINA : Transition Frame
MCF-MINA : Mounting Yoke
MUB-MINA : U Bracket
Durable nylon covers are also available



Product Videos

Rigging Meyer M'elodie 01:44

Finalmente da Meyer il video di come si appende l'impianto, non che non lo sapessimo fare, ma per fare formazione va sempre bene. Grazie John

  • Rigging Meyer ...
    Finalmente da Meyer il video di come si appende l'impianto, no...
  • meyer sound m'...
  • ProLight + Sou...
  • meyer sound m'...
    è la dimostrazione dell'impianto line array m'elodie della mey...
  • meyer sound m'...
  • meyer sound m'...
  • meyer sound m'...
  • meyer m'elodie

Other Details

North America & Europe
Limited warranty
Sales Questions?:

Find Similar Products by Category

Click the button below to add the Meyer MINA Loudspeaker to your wish list.