Site Information

 Loading... Please wait...

Meyer M’elodie Package - 16/Fly


Other Details

Limited warranty
Sales Questions?:

Pre-owned M'elodie Array package in very good shape properly maintained and cared throughout the life of the package.

For inquiries contact

Package components


Meyer Sound M'elodie Ultracompact high-power curvilinear array loudspeaker


STS Cases





Meyer’s M’elodie is proof that “Sometimes, big things come in small packages.” The M’elodie ultracompact high-power curvilinear array loudspeaker is a good example. M’elodie is Meyer Sound’s compact solution within the celebrated M Series. M’elodie brings the sonic signature and easy to use rigging of the MILO family of loudspeakers, along with an extraordinary power-to-size ratio to a package smaller than the company’s MICA compact high-power curvilinear array loudspeaker. As a result, M’elodie is compact enough for small theatres, ballrooms and clubs, as well as being an outstanding performer in theatrical productions and corporate AV applications.

    • Output power- 600 W (900 W peak)
    • Coverage pattern- 100 degree horizontal, vertical varies depending on array length and configuration
    • Exceptional power-to-size ratio
    • Wide and even horizontal coverage pattern
    • Very small footprint keeps a low profile appearance
    • Seamless integration with MICA
    • QuickFly rigging with captive GuideALinks simplifies use in flown or groundstacked arrays, alone or with 500-HP, 600-HP subwoofers
    • Cardiod arrays when used in combination with 500-HP subwoofers

M’elodie can be used as a main system in small venues in combination with 500-HP subwoofers which enhance the low-frequency response and increase the overall acoustic power of the system in the lowest frequencies. In addition the 500-HP can be used to create cardiod arrays. M’elodie versatility does not stop there, its broad 100-degree horizontal coverage makes it ideal for use in larger venues, too, as it is designed to integrate seamlessly with MICA. M’elodie’s QuickFly rigging, which features captive GuideALinks for the maximum in flexibility and safety, make it easy to add as downfill to a MICA array, but individual M’elodie cabinets also work exceptionally well for frontfill or under-balcony coverage. Best of all, M’elodie’s small footprint takes up little truck space.


  • Exceptional power-to-size ratio
  • Wide and even horizontal coverage pattern
  • Very small footprint keeps a low profile appearance
  • Seamless integration with MICA

M'elodie DATA


Operating Frequency Range:

70 Hz - 18 kHz

Frequency Response:

76 Hz - 16 kHz (+/- 4dB)

Phase Response:

1.5 kHz - 16 kHz (+/- 30 degree)

Maximum Peak SPL:

131 dB

Dynamic Range:

> 110 dB





Varies, depending on array length and configuration



1100 Hz


Low/Low-Mid Frequency:

Two 8" cone drivers with neodymium magnets

Nominal impedance: 4 Ω

Voice coil size: 1.5"

Power handling capability: 600 W (AES); 900 W peak

High Frequency:

3" compression driver
Nominal impedance: 8 Ω
Voice coil size: 3"
Diaphragm size: 3"
Exit size: 1.2"

Power handling capability: 180 W (AES); 360 W peak



Differential, electronically balanced

Max. Common Mode Rejection:

+/- 5V DC


Female XLR input with male XLR loop output

Input Impedance:

10k Ohms differential between pins 2 and 3


Pin 1: Chassis/earth through 220 kO, 1000 pF, 15 V

clamp network to provide virtual ground lift at audio frequencies
Pin 2: Signal (+)
Pin 3: Signal (-)

DC Blocking:

Differntial DC Blocking up to the maximum common mode voltage.


> 50 dB, typically 80 dB (50 Hz - 500 Hz)

RF Filter:

Common Mode: 425 kHz
Differntial Mode: 142 kHz

TIM Filter:

Integral to signal processing (<80 kHz)

Nominal Input Sensitivity:

0 dB V (1 V rms, 1.4 V pk) continuous is typically the onset of limiting for noise and music.

Input Level:

Audio source must be capable of producing +20 dBV (10 V rms, 14 V pk) into 600 Ohm

in order to produce maximum peak SPL over the operating bandwidth of the loudspeaker


Amplifier Type:

Three-channel complementary MOSFET output stages (class AB/H)

Output Power:

1275 W (three channels; 2 x 500 W, 1 x 275 W);

Total Output:

2550 W peak


< .02%

Load Capacity:

4 Ohm low and mid; 8 Ohm high channel


Convection Cooled


AC Connector:

PowerCon with looping output or VEAM all-in-one connector (integrates AC, audio and network) 

Voltage Selection:

Automatic, two ranges, each with high-low voltage tap (uninterrupted)

Safety Agency Related Voltage:

95 V AC – 125 V AC, 208 V AC - 235 V AC, 50/60 Hz

Turn On/Off Points:

85 V AC - 134 V AC; 165 V AC - 264 V AC 


Idle Current:

.680 A rms (115 V AC), .360 A rms (230 V AC), .760 A rms (100 V AC)

Max. Long Term Cont (>10 sec):

2.3  A rms (115 V AC); 1.2 A rms (230 V AC); 2.6 A rms (100 V AC)

Burst Current (<1 sec):

4 A rms (115 V AC), 2 A rms (230 V AC), 4.5 A rms (100 V AC)

Ultimate Short Term Peak:

13 A pk (115 V AC), 6.5 A pk (230 V AC), 15 A pk (100 V AC)

Inrush Current:

10 A pk (115 and 100 V AC), 18 A pk (230 V AC)


Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer.



28.54 w x 9.19 h x 12.75 d (724.84 mm x 233.31 mm x 323.85 mm)


Weight 62 lbs (28.12 kg)


Premium Birch Plywood


Black textured

Protective Grill:

Powder-coated hex stamped steel with black mesh


Rigging and Accessories:

QuickFly rigging with four captive GuideALinks in the bottom corners of

two aluminum and steel end frames, secured with quick-release pins


Signal Flow for a Typical Reinforcement System

M'elodie loudspeakers permit versatile arrays and are compatible with other Meyer Sound reinforcement loudspeakers, giving sound designers maximum freedom to customize systems for their needs. This diagram illustrates the signal flow for a typical sound reinforcement system using 12 M'elodie cabinets per side for the main arrays.



Product Videos

Rigging Meyer M'elodie 01:44

Finalmente da Meyer il video di come si appende l'impianto, non che non lo sapessimo fare, ma per fare formazione va sempre bene. Grazie John

  • Rigging Meyer ...
    Finalmente da Meyer il video di come si appende l'impianto, no...
  • meyer sound m'...
  • ProLight + Sou...
  • meyer sound m'...
    è la dimostrazione dell'impianto line array m'elodie della mey...
  • meyer sound m'...
  • meyer sound m'...
  • meyer sound m'...
  • meyer m'elodie

Other Details

Limited warranty
Sales Questions?:

Find Similar Products by Category

Click the button below to add the Meyer M’elodie Package - 16/Fly to your wish list.