Site Information

 Loading... Please wait...

d&b D12 Amplifier

$2,230.00

Other Details

D12 Spec Sheet:
D12 Manual:
Compare d&b Amplifiers:
Condition:
Used

d&b’s D12 two channel amplifier that incorporates digital signal processors (DSP) providing medium to high power into low impedance loads between 4 and 16 ohms and is ideally suited for use in both mobile and installation environments. The D12 contains setups for all d&b loudspeakers and a linear mode. The signal delay capability enables user definable settings of up to 340 msec (=100 m/328.1 ft) to be applied independently to each channel. The same applies to the 4-band parametric equalizer, providing optional boost/cut or notch filtering. The D12 incorporates a digital rotary encoder and a LCD display to configure the amplifier.

The D12 utilizes an auto-sensing switch mode power supply for mains voltages 120 V/230 V, 50 - 60 Hz (optional 100/200V). The D12 amplifier incorporates d&b SenseDrive for accurate control of LF drivers in d&b loudspeakers driven in 2-Way Active mode or in actively driven d&b subwoofers. When the D12 is fitted with EP5 connectors and appropriate 5 wire cabling, d&b SenseDrive can be used, resulting in an extremely precise bass performance even at high levels. NL4 and NL8 connector options are also available. RJ 45 connectors enable access to the Remote network via CAN-Bus. d&b System check verifies that the system performs within a predefined condition, whilst d&b Load monitoring enables an automatic and continuous impedance monitoring. Both can determine the status of an LF or HF driver in systems with multiple elements, even if these are crossed over passively

D12 data

Control and Indicators 

 

POWER

Mains power switch

SCROLL/EDIT

Digital rotary encoder

Display

Liquid Crystal Display (LCD)/120 x 32 pixel

ISP, GR, OVL A/B

LED indicators

Digital Signal Processing

 

Equalizer

4-band PEQ/Notch

Latency analog and digital inputs

0.3 msec.

Delay setting

0.3 - 340 msec. with 0.1 msec. detents

Configurations

current d&b loudspeakers and linear mode

Function switches

d&b loudspeaker specific circuits

Frequency generator

Pink noise or Sine wave

Sampling rate

96 kHz/27 Bit ADC/24 Bit DAC

Connectors 

 

INPUT ANALOG (A1, A2)

3 pin XLR female

ANALOG LINK (A1, A2)

3 pin XLR male

INPUT DIGITAL (D1, D2)

3 pin XLR female AES 3

DIGITAL LINK (Output)

3 pin XLR male

Sampling rate

48 kHz/96 kHz

OUT CHANNEL A/B

NL4
optional EP5/NL8

REMOTE

2 x RJ 45 parallel, CAN-Bus

 

 

SERVICE

SUB-D9 female

Mains connector

powerCON® 1

Data (linear setting with subsonic filter)

 

Rated output power (THD + N < 0.5%, both channels driven)
CF = 6 dB at 4 / 8 ohms
CF = 12 dB at 4 / 8 ohms


2 x 1200 / 750 W
2 x 1600 / 800 W

S/N ratio (unweighted, RMS)

> 110 dBr

Power supply 

 

Autosensing switch mode power supply for

115/230 V, 50 - 60 Hz
optional 100/200 V, 50 - 60 Hz

Dimensions & Weight

 

Height x width x depth

3 RU x 19” x 353 mm/13.9”

Weight

13 kg/28.7 lb

D12 Schematic
d-b-d12-schematic-v4.png

Product Videos

D&B Q7 QBas D12 01:04

Unika Nöjen bygger scen på Clarion Sign Hotell i Stockholm

  • D&B Q7 QBas D12
    Unika Nöjen bygger scen på Clarion Sign Hotell i Stockholm
  • D-Pong game on...
    D-PONG Game on a PA amplifier ( d&b audiotechnik D12 ) http:/...
  • D&B Audio
    Audio Speakers: 14x D&B Q-Sub 4x D&B B2 2x D&B C7-Top 2x D&B C...
  • D80, D20 ampli...
    All d&b amplifiers incorporate sophisticated Digital Signal Pr...
  • Instalacioin d...
    Presentación de la instalación D&B audiotechnik serie V
  • ArrayProcessin...
    The optional ArrayProcessing function within the ArrayCalc sim...
  • d&b D20 Amplif...
    Dastoo Step by step d&B D20 Amplifier with T10 Passive PA spea...
  • d&b audiotechn...
    Ralf Zuleeg, Marc Weber y Matthias Christner de d&b audiotechn...
  • Metallica y d&...
    El escenario donde nace las estrellas y se hacen las leyendas ...
  • PLASA 2015: d&...
    Steve Jones of d&b audiotechnik introduces the Award-winning V...

Warranty Information

Thank you for your interest in the products and services of SHS Global. This Limited Warranty applies to physical goods, and only for physical goods, purchased from SHS Global (the "Physical Goods").

SHS Global, shsglobal.com, shsglobal.org, and shsglobal.store offers a 48 hour period, upon receipt, to inspect items for incorrect shipments or defective items. If an item is found to be defective, please contact SHS Global to resolve to issue as soon as possible. If, during the 48 hour period, an item is found to be defective, SHS Global will offer to ship replacement parts/items for product repair.

This Limited Warranty extends to the original purchaser only and is not transferable.

The all products listed for warrenty, other than the 48 hour warranty listed above, may only be returned, repaired or replaced due to defect through the manufacturer directly, as per the manufacturer's policies.

What does this limited warranty cover?

This Limited Warranty covers any defects in material or workmanship under normal use during the Warranty Period.

What will we do to correct problems?

SHS Global will:

SHS Global, shsglobal.com, shsglobal.org, and shsglobal.store offers a 48 hour period, upon receipt, to inspect items for incorrect shipments or defective items. If an item is found to be defective, please contact SHS Global to resolve to issue as soon as possible. If, during the 48 hour period, an item is found to be defective, SHS Global will offer to ship items for product repair.

How long does the coverage last?

The Warranty Period for Physical Goods purchased from SHS Global is 48 hours from the date of product delivery.

A replacement Physical Good or part assumes the remaining warranty of the original Physical Good or 2 Days from the date of replacement or repair, whichever is longer.

What does this limited warranty not cover?

This Limited Warranty does not cover any problem that is caused by:

Shipping damage; all shipping damage issues will be handled by company, or companies, who shipped the product as agreed to by SHS Global and/or customer of product.

Conditions, malfunctions or damage not resulting from defects in material or workmanship Conditions, malfunctions or damage resulting from negligence, improper maintenance or modification- Damaged or destroyed by natural causes including but not limited to lightning, flood, or other natural disaster- Theft or loss of the Physical Goods This Limited Warranty does not cover any shipping charges, handling charges, gift wrap fees or taxes. You are responsible for and must prepay all shipping charges.

This Limited Warranty is void if the Physical Goods are returned with removed, damaged or tampered labels or any alterations.

What do you have to do?

To obtain warranty service, you must obtain a Return Merchant Authorization (RMA) number and instructions on how to return a product by contacting us.

Deliver the Physical Goods, in either its original packaging, including any accessories or documents that shipped with the Physical Goods to the address specified by SHS Global.

To obtain the Return Merchant Authorization (RMA) number, you can contact us by any of the following contact methods:

By email: andy@shsglobal.com

Other Details

D12 Spec Sheet:
D12 Manual:
Compare d&b Amplifiers:

Find Similar Products by Tag

30D  Amplifier  Audio  d&b  d&b audiotechnik  D12  D20  D80  music  subwoofer  

Find Similar Products by Category

Click the button below to add the d&b D12 Amplifier to your wish list.