Site Information

 Loading... Please wait...

Crown i-Tech 12000HD Amplifier

$2,699.00

Other Details

Customize:
Amp Racks available with multiple units
Location:
North America & Europe
Warranty:
Limited warranty
Condition:
Used

Pre-Owned amplifiers in excellent condition - with just over 1000 hours on each unit

Crown’s I-Tech HD 12000HD offers amazing power, light weight and ease of use for touring sound applications. Crown I-Tech HD Series features a road-warrior-inspired front panel USB slot for load and recall of amplifier settings. Chief engineers can simply hand pre-loaded USB keys to entry-level staff who can now quickly, cost-efficiently and accurately configure entire racks by inserting the correct key and pressing the load button. A patent-pending intuitive front panel work surface with LCD display provides fast and easy menu-based system setup and full amplifier diagnostics.

Protected by a rugged 2U chassis, the I-Tech HD weighs in at a lightweight 30 lbs. (13 kg.) but its proven, Class-I output design packs a heavyweight punch to deliver massive amounts of power while generating minimal heat. Crown Audio’s patented Power Factor Correction (PFC) techniques allow I-Tech HD to draw current from the mains more efficiently, which in concert with the Class-I output enables I-Tech HD to provide the highest output voltage available and a clearly audible difference driving high-performance loudspeakers

Features

  • Global Power Supply with PFC (Power Factor Correction) works anywhere in the world.
  • High power density, up to 9000 watts in a 2U chassis.
  • Highest output voltage in the industry (200V peak) provides clean transient peaks.
  • 3rd-generation patented Class I (BCA®) circuitry couples power efficiently to the load and provides low AC current draw.
  • Onboard high-definition DSP with 24-bit, 192 kHz Cirrus Logic SHARC A/D and D/A converters. Advanced IIR filters and linear phase FIR filters.

i-Tech 12000HD DATA

 

 

Performance I-T12000HD

20 Hz - 20 kHz with 0.35% THD:

 

Stereo, 2 ohms (per ch.)

3750W

Stereo, 4 ohms (per ch.)

4500W

Stereo, 8 ohms (per ch.)

2100W

Bridge mono, 4 ohms

7500W

Bridge mono, 8 ohms

9000W

 

Specifications

Input Sensitivity (volts RMS) for rated output

Adjustable in 0.1V steps from 1.28V to 8V

Voltage Gain for full rated power at 8 ohms

37.1 dB to 22.2 dB

Frequency Response (at 1 watt, 20Hz - 20 kHz)

± 0.25 dB

Signal to Noise Ratio below rated full-bandwidth power, A-weighted

> 108 dB

Total Harmonic Distortion (THD) at full rated power at 1 kHz

< 0.1%

Inter modulation Distortion (IMD)

60 Hz and 7 kHz at 4:1, from full rated output to –35dB

< 0.35%

Maximum Input Level

+15 dBu or +21 dBu, depending on setting of maximum input level

Latency

1.16 mS at 48 kHz, 529 μS at 96 kHz

A/D, D/A Converters

24-bit 96 kHz Cirrus Logic

Digital Input

AES/EBU, 24-bit, 32-96 kHz. Onboard sample rate converter.

Network

Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware

DSP

24-bit conversion with 32-bit, floating point DSP processing

Attenuators

Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to –100 dB.

Damping Factor (8 ohms)

20 Hz to 100 Hz; > 5000

Crosstalk (below rated power, 20 Hz to 1 kHz)

> 80 dB

Common Mode Rejection (CMR) (20 Hz to 1 kHz)

> 55 dB, typically > 70 dB

DC Output Offset (Shorted input)

< ± 3 mV

Input Impedance (nominal)

20 kilohms balanced, 10 kilohms unbalanced

Load Impedance (Note; Safe with all types of loads)

Stereo; 1-2-4-8-16 ohms,

Bridge Mono: 2-4-8 ohms

Required AC Mains

Universal AC input, 100-240VAC (±15%), 50/60 Hz. Max.

AC mains voltage 277VAC.

Construction Ventilation

Flow-through ventilation from front to back

Cooling

Dual-zone, microprocessor controlled, continuously variable speed fans

Dimensions

Width EIA Standard 19" rack mount (EIA RS-310B)

Height 3.5-inch (8.9-cm)

Depth 16.2-inch (41.1-cm) behind front mounting surface

Weight

12.7 kg

 

 

Product Videos

Crown I-Tech I-T4000 And Crown I-Tech I-T6000: The I-Tech Series At 125th AES 2008 02:25

Without even getting into its power or its front panel and menu features, the crowning achievement of Crown's I-Tech series, featuring the Crown I-T4000 and the Crown I-T6000, is that its able to reach across party lines and bring digital and analog together. In fact, in a live setting where a failure on either end could really cause disaster, analog and digital even have each other's backs, making sure that the I-Tech series amps run like well oiled machines.

  • Crown I-Tech I...
    Without even getting into its power or its front panel and men...
  • Crown I-Tech 4...
    This video is the first in a series of videos about the new Cr...

Other Details

Customize:
Amp Racks available with multiple units
Location:
North America & Europe
Warranty:
Limited warranty

Find Similar Products by Category

Click the button below to add the Crown i-Tech 12000HD Amplifier to your wish list.